When you purchase a Sunbeam heating blanket, it comes complete with a range of safety features. These monitors alert you to any potential issues with your blanket so that you can correct them before they become dangerous. As such, when you unpack and set up your new Sunbeam heating blanket, you may notice some indicators blinking on the control panel. What does this mean? If your Sunbeam heating blanket is blinking, there are simple fixes that will return it to normal operation. Read on to learn more about why your Sunbeam heating blanket is blinking and what you should do next.
Why Is My Sunbeam Blanket Blinking?
If you’ve ever owned a Sunbeam Heating Blanket, then you know they are an exceptional product. However, every once in a while there can be some trouble with the wiring or the settings that make your blanket not work properly. Many times, it is a minor flaw that can be corrected easily by following the troubleshooting steps below. But if the problem persists, don’t hesitate to contact their customer service department and see what they recommend. Here are the reasons why is your Sunbeam Heating Blanket blinking and what you can do about it:
The blanket is not set to the correct heating level.
When the blanket is not set to the correct heating level, it is an indication that there is a short-circuit in the wiring. Or, the blanket is not plugged in all the way. If you find that your blanket is blinking and it is not set to the correct heating level, this is the most likely cause. You should check to make sure that the blanket is plugged into a wall outlet and that the outlet is not overloaded. If the outlet is overloaded, you should find a different outlet. If the outlet is not overloaded, then you should check the wiring to make sure it is not frayed or short-circuiting. If the wiring is not frayed or short-circuiting, then you should reset the blanket to the correct heating level by pressing the Off/On button.
The battery has died and needs to be replaced.
If your blanket is blinking and the battery is completely dead, it is no longer able to regulate the temperature of your blanket. This is an indication that it is time to replace the battery. You can find the battery replacement instructions in the user manual or online. Make sure you get the correct battery for your blanket. Replacing the battery will reset the blanket and will resolve the blinking issue.
There is a short in the wiring.
If your blanket is blinking, the best thing to do is unplug it from the wall outlet and inspect the wiring. If it is frayed or short-circuiting, you should contact Sunbeam customer service for assistance. If it is not frayed or short-circuiting, you should reset the blanket by pressing the Off/On button to reset the blanket.
You have the blanket in the wrong setting.
Sometimes a blanket will blink if the setting is wrong. If the blanket is blinking and you are sure that it is plugged in, check the blanket settings to make sure they are correct. If the settings are correct, reset the blanket by pressing the Off/On button.
There is a manufacturing defect.
A blinking blanket could also mean that there is a manufacturing defect. In this case, you should contact Sunbeam customer service and have them inspect your blanket. If they determine that your blanket has a manufacturing defect, they will repair or replace it.
There is an unknown issue – perhaps a rodent chewing on your wires?
Rodents love the taste of wires, and your electrical cables are no exception. If you have a blinking blanket, the first thing you should do is check the wiring. If you see any signs of chewing, you should reset the blanket by pressing the Off/On button. Unfortunately, there is no other way to remove the rodent other than killing it. If you see a dead rodent on your wires, it is best to throw away the blanket, as the rodents may have created a short-circuit in the wiring.
How To Fix The Sunbeam Heating Blanket Blinking?
If you have a sunbeam heating blanket, you have probably noticed it blinking on and off. Or perhaps your blanket won’t turn on at all. Fortunately, these problems are fairly common with the sunbeam heating blanket, and they can easily be fixed. You don’t need to spend money replacing your entire blanket or heater. Instead, there is a simple fix for most of the problems that you might experience with your blanket. If the power light on your heating blanket keeps blinking, it means something is not right with it. The same goes for if it won’t come on at all – there could be something wrong with it. In this article, we list seven tips to fix the sunbeam heating blanket blinking and other issues so that you can get back to enjoying its comfort again as soon as possible.
Check the power cord
If your blanket is blinking, then the first thing to do is check the power cord to make sure it is not damaged. If the cord is broken or frayed, it could be preventing your blanket from working properly. You can also check the plugs at both ends of the power cord to make sure they are fully plugged in. If the cord is damaged or unplugged, you will need to replace it. You can purchase a replacement card from places like Amazon. If the cord is fine, then the next thing to check is whether the power outlet you are plugging your blanket into is working properly. If it isn’t, then you won’t be able to get your blanket to work. To check the outlet, plug something else into it to make sure it is working. If it is not, then you will need to call an electrician to have it fixed.
Make sure it is plugged in
If your blanket keeps blinking, even when it is plugged in, then the problem could be that it is not plugged in all the way. You might not be connecting the blanket to its power source properly, or the plug could be loose and not fully inserted into the outlet. Make sure you plug the blanket in all the way and connect it properly to its power source. Alternatively, your outlet could be faulty and not be providing enough power. Check that the outlet is working properly and that there are no loose wires. If it is faulty, you might need to call a professional to have it fixed or replaced.
Reset the blanket
If your blanket keeps blinking and you have checked the power cord and plugged it in properly, then you may need to reset the blanket. This can happen if the blanket has been unplugged while it is on high heat, or if there was a power surge while it was on. You can reset the blanket by unplugging it from the outlet and then plugging it back in again after 30 seconds.
Check the control panel buttons
If your blanket keeps blinking even after you have reset it, then there could be something wrong with the control panel. Make sure all the buttons are pushed in and fully pressed down. If they are not, then push them all in properly. If there is a loose wire or connection, then you will need to open up the control panel and re-connect it. You can find instructions for opening the control panel and fixing any problems with it online.
Make sure your blanket is not overheating
One reason your blanket could keep blinking is that it has been overheating. If the temperature of your blanket gets too high, the control panel will blink and the blanket will automatically shut itself off. You will know this is happening in the control panel making a beeping sound. The blanket will also likely feel very warm. If this is happening, then you will need to lower the temperature setting on your blanket to make it lower heat. You can also try to reduce the amount of time you use the blanket.
Wrapping Up
When you purchase a Sunbeam heating blanket, it comes complete with a range of safety features. These monitors alert you to any potential issues with your blanket so that you can correct them before they become dangerous. What does this mean? If your Sunbeam heating blanket is blinking, there are simple fixes that will return it to normal operation.
